BATLOGGER M2
Next generation mobile monitoring
Simple, easy to use and a full set of features
Always the right settings for every task
See what you record
Ergonomically designed for a good grip
Simple, easy to use and a full set of features
Always the right settings for every task
See what you record
Ergonomically designed for a good grip
The BATLOGGER M2 is easy to use and provides all the features you need in a bat detector. You can tag recordings during your survey and make voice recordings with additional information, so that it’s the only tool that you need to have with you.
Transect or emergence counts? We have the right settings already built in for all your surveys.
Just select the mode before you start and you’re ready to go.
Custom profiles can be created for special situations.
Replace your microphone without any tools. The microphone caspsule is save inside its housing and survives drops much better than our previous
Don’t worry about replacing batteries or even using disposable batteries.
Want to charge your BATLOGGER M2 in the field using a power bank? No problem.
Use any USB-IF approved USB charger.
Copy recordings to your computer while charging your BATLOGGER. Thanks to the USB-C connector, you don’t even have to remove the microSD card anymore. But of course you can still use the microSD card for the file transfer if you want to.
| Field of application | Active (mobile) monitoring |
|---|---|
| Audio/Recording | |
| Acoustic signal processing | Real time 16bit-full spectrum |
| Sampling rate | 312.5kHz, 384kHz, 500kHz |
| Type of microphone | SiSonic |
| Number of microphones | 1 |
| Sensitivity range | 10–192kHz |
| Live monitoring | Heterodyne (automatic or manual), Divider |
| Trigger function | yes, adjustable |
| Scheduler | yes, adjustable, with sunset/sunrise times |
| Audio out | 3.5mm plug / speaker |
| Storage | microSD card, 16GB included |
| Operation | |
| Display | LCD 240x320 |
| Interface | Push-buttons |
| GPS | yes |
| Sensors | Temperature, humidity, brightness |
| Casing | |
| Size (WxLxD) | 220 x 70 x 46 mm |
| Weight | 222g |
| Protection class | IP40 (except microphone) |
| Power | |
| Power supply | internal 3.6V, 2500mAh battery, USB-C charging |
| Operating time | up to 15h per battery charge |
More about:
BATLOGGER
,
Real-time
,
Heterodyne
,
Mobile
,
Bat detector
,
Active
,
Ultrasonic recorder
