Contains

• BATLOGGER Firmware

Installation

1. Make sure that the BATLOGGER battery is fully charged
2. Download the Firmware file (ZIP) to the computer
3. Place the SD card into the computer
4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file ‘FWX-X-X.BL’ must be placed in the root folder of the SD card.
5. Place the SD card into the BATLOGGER
6. Turn on the BATLOGGER
7. The firmware file is recognised and prompted to install
8. Press ‘>>’ to install, after installation the BATLOGGER turns off
9. Turn on the BATLOGGER
10. The Firmware is verified and prompted to delete
11. Press ‘>>’ to delete
12. The BATLOGGER starts up to operation

Changelog

(2.2.8 Released 23.05.2013)

• Compatibility improved
• Fixed: Some devices did not wakeup correctly during delayed recording
• Bugfixing

(2.2.7 Released 08.03.2013)

• Faster charging for BATLOGGER M
• Compatibility with Mic FG black
• Added manual set date/time function in Setup->Misc
• Fixed: Some devices did not wakeup correctly during delayed recording
• Cosmetics and other small bugfixes

(2.2.6 Released 14.01.2013)

• Support new BATLOGGER M
• New CrestAdv trigger with enhanced call detection and reduced noise sensitivity below 25kHz
• Display detected activity frequency
• Added possibility to detect/display bat activity without automatic recording (although can be started manually)
• Added GPX Track recording
• Added analyse recording
• Added mixer playback
• Improved GPS location display and handling (configurable update intervall, faster fix, …)
• Improved menu display and navigation
• Changed setup parameters are now saved to the BATPARS file by default
• Added delete BATPARS file function
• Recording DateTime new stamped on trigger start for better comparability, was file saving time
• Microphone test function added (Record noise spectrum to logfile)
• GPS timestamps are now local time instead of utc
• Cosmetics and other small bugfixes