BATLOGGER A2 Firmware 1.0

BATLOGGER A2 Firmware 1.0

Device Firmware

FW 1.0
Firmware 1.0.1. Compatible with BATLOGGER A2 devices.

Contains

  • BATLOGGER A2 Firmware
  • Update instructions

Installation

  1. Make sure that the device battery is fully charged.
  2. Download the firmware file (ZIP) to the computer.
  3. Connect the sd card with a card reader to your computer.
  4. A mass storage drive of the SD card appears.
  5. Extract the downloaded ZIP file and copy the extracted files to the SD card. The file ‘BLA2_X.X.X.upc’ must be placed in the root folder of the SD card.
  6. Use the computers ‘Eject drive’ function to safely remove the sd card from the computer.
  7. Place the sd card in the device.
  8. Turn on the device to initiate the firmware update.
  9. The device LED flashes in rapid succession until the update has been completed. This may take several minutes.
  10. Wait until the device LED stops flashing for more than 10s.

See https://www.elekon.ch/manuals/bla2/update_firmware.html for further instructions.



Changelog

(1.0.1 Released 10.04.2026)

  • Various stability improvements

More about:
BATLOGGER ,  Firmware