Download

FW 2.5 - BATLOGGER C

15.2 MB 
06.09.2017

Contains

  • BATLOGGER Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER manuals


Installation

  1. Make sure that the BATLOGGER battery is fully charged
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file 'FWX-X-X.BL' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER
  6. Turn on the BATLOGGER
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the BATLOGGER turns off
  9. Turn on the BATLOGGER
  10. The Firmware is verified and prompted to delete
  11. Press '>>' to delete
  12. The BATLOGGER starts up to operation

Changelog

(2.5.0 Released 06.09.2017)

  • New DISPLAY_MODE setting (All, Rec, GPS, Custom) to choose information displayed during recording mode
  • Custom display mode to freely define information displayed during recording mode
  • New "SD-Trigger" mode: Record periodic signals within frequency boundaries only
  • Option to ignore a frequency for n seconds after the last recording (Post-Trigger ignore)
  • BATSTAT.csv with recording statistics
  • New optional "Squelch" (automatic muting of live monitoring output after n seconds with no trigger event)
  • Extended SMS/Email notification
  • Various stability improvements

Show all downloads