BatExplorer

64 MB 
04.07.2016

Installation

  • Download setup file
  • Run the setup file (EXE)
  • Follow the instructions

System requirements

  • Windows 7 (recommended), 
    • or Windows Vista SP1 (SP2 and Platform Update recommended),
    • or Windows 8.1
    • or Windows 10
  • Windows Media Player 11 or higher  (with installed AAC-Codec) 
  • min. 1000MHz processor (multi-core recommended)
  • min. 1024MB RAM (> 4GB recommended)
  • min. 1024 x 768 screen resolution
  • 500+ MB hard drive space (depends on the number of recordings)


BatExplorer depends on Microsoft's .NET Framework 4.5, which is automatically installed if it isn't already on the system.

 
04.07.2016
59 MB 
30.04.2014

Installation

  • Download setup file
  • Run the setup file (EXE)
  • Follow the instructions

System requirements

  • Windows 7 (recommended), 
    • or Windows Vista SP1 (SP2 and Platform Update recommended),
    • or Windows 8.1
  • Windows Media Player 11 or higher  (with installed AAC-Codec) 
  • min. 1000MHz processor (multi-core recommended)
  • min. 1024MB RAM (> 4GB recommended)
  • min. 1024 x 768 screen resolution
  • 500+ MB hard drive space (depends on the number of recordings)


BatExplorer depends on Microsoft's .NET Framework 4.0, which is automatically installed if it isn't already on the system.

 

BATLOGGER C

Firmware

15.2 MB 
06.09.2017

Contains

  • BATLOGGER Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER manuals


Installation

  1. Make sure that the BATLOGGER battery is fully charged
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file 'FWX-X-X.BL' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER
  6. Turn on the BATLOGGER
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the BATLOGGER turns off
  9. Turn on the BATLOGGER
  10. The Firmware is verified and prompted to delete
  11. Press '>>' to delete
  12. The BATLOGGER starts up to operation

Changelog

(2.5.0 Released 06.09.2017)

  • New DISPLAY_MODE setting (All, Rec, GPS, Custom) to choose information displayed during recording mode
  • Custom display mode to freely define information displayed during recording mode
  • New "SD-Trigger" mode: Record periodic signals within frequency boundaries only
  • Option to ignore a frequency for n seconds after the last recording (Post-Trigger ignore)
  • BATSTAT.csv with recording statistics
  • New optional "Squelch" (automatic muting of live monitoring output after n seconds with no trigger event)
  • Extended SMS/Email notification
  • Various stability improvements

13.6 MB 
20.06.2016

Contains

  • BATLOGGER C Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER C manuals


Installation

  1. Make sure that the BATLOGGER C battery is fully charged
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The files 'FWX-X-X.BC' and 'FWCX_X_X.BFC' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER C
  6. Turn on the BATLOGGER C
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the device restarts
  9. The firmware is verified and prompted to delete
  10. Press '>>' to delete the firmware file, or 'MENU' to keep the file for an other device update
  11. If needed, the device updates the BFC firmware file automatically
  12. The BATLOGGER C starts up to operation


Changelog

(2.4.6 Released 20.06.2016)

  • BATPARS Editor Software with runtime estimation
  • Improved charging when using two batteries
  • Fixed 12V power supply switch was inverted
  • Various stability and performance improvements


(2.4.4 Released 30.10.2015)

  • Various stability and performance improvements


(2.4.3 Released 22.09.2015)

  • Various stability and performance improvements


Manuals

 
23.02.2016
 
30.04.2015
next

BATLOGGER M

Firmware

Contains

  • BATLOGGER Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER manuals


Installation

  1. Make sure that the BATLOGGER battery is fully charged
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file 'FWX-X-X.BL' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER
  6. Turn on the BATLOGGER
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the BATLOGGER turns off
  9. Turn on the BATLOGGER
  10. The Firmware is verified and prompted to delete
  11. Press '>>' to delete
  12. The BATLOGGER starts up to operation

Changelog

(2.5.0 Released 06.09.2017)

  • New DISPLAY_MODE setting (All, Rec, GPS, Custom) to choose information displayed during recording mode
  • Custom display mode to freely define information displayed during recording mode
  • New "SD-Trigger" mode: Record periodic signals within frequency boundaries only
  • Option to ignore a frequency for n seconds after the last recording (Post-Trigger ignore)
  • BATSTAT.csv with recording statistics
  • New optional "Squelch" (automatic muting of live monitoring output after n seconds with no trigger event)
  • Various stability improvements

Contains

  • BATLOGGER Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER manuals


Installation

  1. Make sure that the BATLOGGER battery is fully charged
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file 'FWX-X-X.BL' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER
  6. Turn on the BATLOGGER
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the BATLOGGER turns off
  9. Turn on the BATLOGGER
  10. The Firmware is verified and prompted to delete
  11. Press '>>' to delete
  12. The BATLOGGER starts up to operation

Changelog

(2.4.6 Released 20.06.2016)

  • BATPARS Editor Software with runtime estimation
  • Various stability improvements


(2.4.4 Released 30.10.2015)

  • Fix occasional device locked after FW upgrade
  • Various stability and performance improvements


(2.4.3 Released 22.09.2015)

  • It is now possible to open process menu during sampling to directly listen to last recordings
  • Added Play Pitch and Play Mixer to directly choose playback mode
  • LCD-Backlight brightness is now configurable 0..100%
  • Added new GPS Mode 4: Set manual location from GPS when starting recording mode
  • Added LockDevice option for theft protection
  • Improved manual date/time entry
  • FolderMode Daily is now default
  • Create ROUTE.kml on startup in root and BL folders to better support BATSCOPE
  • Support Charger-Relais (supported models only)
  • Added better crash handling and logging
  • Added warning messages if mic or mic connection damaged
  • Various stability and performance improvements


Contains
  • BATLOGGER Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER manuals

Installation

  1. Make sure that the BATLOGGER battery is fully charged
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file 'FWX-X-X.BL' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER
  6. Turn on the BATLOGGER
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the BATLOGGER turns off
  9. Turn on the BATLOGGER
  10. The Firmware is verified and prompted to delete
  11. Press '>>' to delete
  12. The BATLOGGER starts up to operation

Changelog


(2.3.5 Released 14.05.2015)

  • Added GPS module reset function
  • Stability improvements 


(2.3.3 Released 30.04.2014)

  • Fix/Improve interval recording mode
  • Monitoring is now disabled per default and volume default is 2
  • Respect SD-Card WriteProtected switch (some devices only)


(2.3.2 Released 31.03.2014)

  • Added Sunset/sunrise time mode for delayed recording
  • Added FOLDER_MODE to allow to save recordings (and XML, GPX, KML) into daily/weekly/monthly folders
  • Added support for SD cards >32GB. It is now possible to format SDXC cards with FAT32 in device (tested wit 64GB and 128GB)
  • Added true manual timemode
  • Added manual mixer mode, change mixer frequency while sampling
  • Added reset mixer frequency with "<<" key while sampling
  • Added BLWiFi support
  • Updated/improved menu navigation
  • Improved GPS position fix and update between two recordings
  • Cosmetics and other small bugfixes


Changelog


(2.2.8 Released 23.05.2013)

  • Compatibility improved
  • Fixed: Some devices did not wakeup correctly during delayed recording
  • Bugfixing

    (2.2.7 Released 08.03.2013)
  • Faster charging for BATLOGGER M
  • Compatibility with Mic FG black
  • Added manual set date/time function in Setup->Misc
  • Fixed: Some devices did not wakeup correctly during delayed recording
  • Cosmetics and other small bugfixes

    (2.2.6 Released 14.01.2013)
  • Support new BATLOGGER M
  • New CrestAdv trigger with enhanced call detection and reduced noise sensitivity below 25kHz
  • Display detected activity frequency
  • Added possibility to detect/display bat activity without automatic recording (although can be started manually)
  • Added GPX Track recording
  • Added analyse recording
  • Added mixer playback
  • Improved GPS location display and handling (configurable update intervall, faster fix, ...)
  • Improved menu display and navigation
  • Changed setup parameters are now saved to the BATPARS file by default
  • Added delete BATPARS file function
  • Recording DateTime new stamped on trigger start for better comparability, was file saving time
  • Microphone test function added (Record noise spectrum to logfile)
  • GPS timestamps are now local time instead of utc
  • Cosmetics and other small bugfixes
293 KB 
01.10.2010

Changelog

(Released Oct. 2010)

  • Show peak trigger frequency in display and save it to xml file
  • PeriodTrigger improvements
  • "Play all"-function
  • Menu navigation improvments
  • Other small fixes
293 KB 
01.05.2010

Manuals

next

BATLOGGER A/A+

Firmware

12.8 MB 
06.09.2017

Contains

  • BATLOGGER A/A+ Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER A/A+ manuals


Installation

  1. Make sure to use fully charged batteries
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file 'FWX-X-X.BA' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER A/A+
  6. Turn on the BATLOGGER A/A+
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the device restarts
  9. The Firmware is verified and prompted to delete
  10. Press '>>' to delete
  11. The BATLOGGER A/A+ starts up to operation

Changelog

(2.5.0 Released 06.09.2017)

  • New "SD-Trigger" mode: Record periodic signals within frequency boundaries only
  • Option to ignore a frequency for n seconds after the last recording (Post-Trigger ignore)
  • BATSTAT.csv with recording statistics
  • Various stability improvements

11.2 MB 
20.06.2016

Contains

  • BATLOGGER A/A+ Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER A/A+ manuals


Installation

  1. Make sure to use fully charged batteries
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file 'FWX-X-X.BA' must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER A/A+
  6. Turn on the BATLOGGER A/A+
  7. The firmware file is recognised and prompted to install
  8. Press '>>' to install, after installation the device restarts
  9. The Firmware is verified and prompted to delete
  10. Press '>>' to delete
  11. The BATLOGGER A/A+ starts up to operation

Changelog

(2.4.6 Released 20.06.2016)

  • BATPARS Editor Software with runtime estimation
  • Various stability improvements


Manuals

next

BATSCANNER STEREO

 
29.08.2014
next

BATSCANNER

 
30.08.2011

BATSCANNER STAND

324 KB 
19.04.2017