BATLOGGER C Firmware 2.6

BATLOGGER C Firmware 2.6

Device Firmware

Firmware 2.6.3. Compatible with BATLOGGER C devices.

Contains

  • BATLOGGER Firmware
  • BATPARS Editor Software (Windows and MAC)
  • BATLOGGER manuals

Installation

  1. Make sure that the BATLOGGER battery is fully charged
  2. Download the Firmware file (ZIP) to the computer
  3. Place the SD card into the computer
  4. Extract the downlaoded ZIP file and copy the extracted files to the SD card. The file ‘FWX-X-X.BL’ must be placed in the root folder of the SD card.
  5. Place the SD card into the BATLOGGER
  6. Turn on the BATLOGGER
  7. The firmware file is recognised and prompted to install
  8. Press ‘>>’ to install, after installation the BATLOGGER turns off
  9. Turn on the BATLOGGER
  10. The Firmware is verified and prompted to delete
  11. Press ‘>>’ to delete
  12. The BATLOGGER starts up to operation



Changelog

(2.6.3 Released 06.05.2022)

  • Improved GSM/LTE provider compatibility

(2.6.2 Released 29.06.2020)

  • Various stability improvements

(2.6.0 Released 22.11.2019)

  • Added GUANO metadata
  • Added folder mode “Every Start”
  • Added more custom display mode fields
  • Switch to auto in manual monitoring mode by setting frequency to 0
  • LTE-Modem support
  • Improved GPS module support
  • Various other improvements

More about:
BATLOGGER Firmware