Microphone Tester Pulse

The quickest way to test your bat detector microphone. The Microphone Tester Pulse can be used to test microphones of BATSCANNER and BATLOGGER devices. Due to its size, it is the ideal device to have always with you for a quick check ahead of your bat walk. 

Specifications

Dimensions

60x40x19 mm

Weight

25 g
Range20 – 100 kHz
ManualDownload


MEMORY CARDS

Very fast UHS-I SD cards with transfer rates up to 85 MB/s provide good results during your ultrasonic recordings. We offer SDHC cards with 16 GB and 32 GB of memory, and SDXC cards with 64 GB, 128 GB and 256 GB.

BATLOGGER C ACCESSORIES

THEFT-PROTECTION
The padloc with numerival code prevents the BATLOGGER C from unauthorized opening. It is the waterproof securing of your valuable device.
Cable lock for securing the BATLOGGER C at another fixed-point. The 2 m long rope sling can wrap around trees, parts of buildings and masts. This makes stealing the device difficult.
POWER-OPTIONS

One Li-Ion battery-pack provides 50 h recording time for the BATLOGGER C. If a second battery slot is equipped with an additional battery, 100 h recording time can be achieved. 

The batteries can be replaced in the field, usually right together with the SD card exchange.

Your additional battery-packs can be easily recharged at home with the external charger.

The solar panel enables the BATLOGGER C to make almost endless bat recordings. The 20 W photovoltaic panel provides enough energy, even with limited sun exposure or in difficult conditions.  Along with 2 battery-packs you only need half a day with sun in 10 days to recharge the batteries.
MICROPHONE CABLES AND ADAPTERS

Ultrasonic microphone FG black

  • Electret condensator
  • Omni directional
  • Integrated preamplifier
  • Weather resistant
  • Temperature measurement
  • 3.5 mm connector, gold-plated
  • 10 – 130 kHz

Microphone cable, integrated test

A microphone cable with integrated microphone test allows an automatic monitoring of the sensitivity. With the MC32, a possible failure can be detected early.
For an installation in a wind power plant the MC32W is optimal. In addition to the audio, the GSM signal is fed out of the gondola and thereby improves the signal strength significantly.

next

BATLOGGER M Accessories

STRONGBOX

Do you want to install the BATLOGGER in the field for a longer time?
The Strongbox allows the long-term surveillance and monitoring of bat habitats. It protects the BATLOGGER from the weather and extends the operating time with additional batteries. 

  •  up to 153 h (corr. 19 nights à 8 h) recording time with the BATLOGGER
  •  state of the art Li-Ion technology with integrated protective circuit
  •  with 1.5 m microphone cable and microphone protection
  •  Shockproof, weatherproof and waterproof
  •  inconspicuously placeable in the field
  •  very lightweight, much lighter than conventional batteries (only 1.0 – 1.5 kg, w/o BATLOGGER)
  •  incl. external charger (charging time max. 14 h)
EXTENSION KIT GREEN 100M

This cable allows greater freedom in placing the microphone. Good example for use in caves or masts for wind studies. The BATLOGGER can be easily placed for example to reach to allow the SD card exchange. Particularly suitable for use with the StrongBox. 

  •  Microphone FG green, pluggable
  •  100 m highend cabel, shielded
  •  microphone protection tube with mounting notch
  •  Earth connection to suppress interference  
  •  Delivered on practical cable reel
MICROPHONES

Ultrasonic microphone FG black

  • Electret condensator
  • Omni directional
  • Integrated preamplifier
  • Weather resistant
  • Temperature measurement
  • 3.5 mm connector, gold-plated
  • 10 – 130 kHz

Ultrasonic microphone FG green – only applicable with extension kit green 100m

  • Electret condensator
  • Omni directional
  • Integrated preamplifier
  • Weather resistant
  • Temperature measurement
  • 3.5 mm connector, gold-plated
  • 10 – 130 kHz
MICROPHONE-EXTENSION

Microphone extension 2 m, waterproof

Suitable for BATLOGGER and BATLOGGER M with and without Strongbox. The microphone is kept safe and tight, but can be replaced easily by hand. The integrated tripod socket allows to mount the microphone in many different ways.



Microphone extension 2 m

Simple microphone extension, length: 2 meters.

Compatible with BATLOGGER and BATLOGGER M. 

next

BATLOGGER A/A+ Accessories

POWER-OPTIONS

One Li-Ion battery pack provides 70 hours recording time for the BATLOGGER A+. Charge a second battery pack at home with an external charger and replace it easily at your recording location. 

With this setup you can run your BATLOGGER A+ without any interruptions.

MICROPHONE CABLES AND ADAPTERS

Ultrasonic microphone FG black

  • Electret condensator
  • Omni directional
  • Integrated preamplifier
  • Weather resistant
  • Temperature measurement
  • 3.5 mm connector, gold-plated
  • 10 – 130 kHz

Microphone cable, integrated test

A microphone cable with integrated microphone test allows an automatic monitoring of the sensitivity. With the MC32, a possible failure can be detected early. 

SECURITY SET BATLOGGER A+

The security set for BATLOGGER A+ is made of stainless steel and prevents the device from manipulations and theft, or can be used to mount device in the field.  The base plate helps to mount the device (e.g.  with a tension belt on a tree) and the safety clamp closes the device. A standard padlock (not included in delivery) locks the set.


next

Batscanner accessories

MICROPHONE

Replacement microphone (BATSCANNER)

  • MEMS-Electret
  • Omni directional
  • 2.5 mm connector
  • 10 – 130 kHz


Compatible to the BATSCANNER (not BATSCANNER STEREO)

next

(TRI)PODS

The 2 m telescope-bar is lightweight and small, easy to store and can simply be placed in the field. With a weight of just 850 g and a length of 75 cm it can also be attached to the backpack when the monitoring area can only be reached by foot. A special holder to attach the telescope-bar with pegs and guy rope is also available.

The flexible tripod allows the fixation of the microphone on the ground. Moreover it can be attached to many places because of its bendable legs. The height of 25 cm permits easy transport and the ball head allows the changing of the orientation of the microphone.

With the clamping and table tripod it is easy to fix the microphone on a flat surface or on bars and railings up to 4 cm thickness. The tripod legs can be stowed in an opening at the bottom.

The suction pod is suitable for all smooth surfaces. Thanks to the 3D ball head the microphone can be positioned in different directions. Especially during transects by car, this 7 cm high pod is a simple and good fixing tool.

The pipe clamp pod is suitable for attaching the microphone to handlebars or other round bars or pipes up to 3 cm diameter. Especially on transects with a bicycle the microphone is securely fixed.

The extendable telescope holder is ideal for walks and transects in order to keep the microphone and cable comfortably. When used in the backpack your hands are free. The telescopic holder can be adjusted in length from 25 cm to 90 cm and provides alternatively a GoPro mount for active filmmakers.
next